CHINA MASCOT PRODUCTS CO.,LTD.

2F, No.10, Lane 46 Yanji St., Taipei Taiwan

TEL:886-2-2570-1950 FAX:886-2-2570-1949

E-mail: bents@bents.com.tw

Model: CONVENIENCE-I

ASSEMBLY GUIDE

( 1 ) Take out from carton or bag

(2) Trailer folded

(3) pull up the upper frame (4) pull up the frame stand near the rear fork

(5) take off insert pin (6) Aiming at the upper frame and stand, put the insert pin through hole and lock.

(7) upper frame and stand assembled. (8) loosen the quick release lever to prepare to

assemble rear wheel.

(9) Adjust the rear wheel quick release (10) put the wheel on the rear fork and tighten fender

(11) Tight the rear wheel quick release. (12) Rear wheel assembled.

(13) Mount the reflector.

(14) Release the trailer quick release from trailer front fork.

This quick release will replace your bike’s rear wheel quick release.

(15) Turn off the front fork revolver and take out the connect spindle.

(16) Combine the trailer frame and front fork. Put in connect spindle and fix.

(17) Lock the revolver tight. (18) Put in the safety flag, Trailer assembly finished!

(19) Replace your bike’s rear wheel quick release with the trailer’s quick release.

(20) Put assembled trailer on the quick release.

Push down the safety lock and pull forward till end hole aligns with the safety lock.

Reverse the steps to easily dismantle the trailer.

One folded trailer can be carried in the available waterproof bag.